10
EG-PMS
PROGRAMMABLE USB SURGE PROTECTOR
All brands and logos are registered trademarks of their respective owners
2.2. Indicators
•
Main rocker switch
Z (see Figure #1 above) is lit – this means that
EG-PMS is connected to the power supply and active
•
Power indicator
(see Figure #1 above) is lit – this means that the
non-manageable sockets (marked with the sign
) are
switched on
•
The indicator
Socket 1 (2,3,4)
(see Figure #1 above) is lit – this
means that this particular socket is switched on
2.3. Audible signals
•
Long beep – will be heard after EG-PMS is successfully connected
to the computer USB port after the self-test
•
Short beep – will be heard by switching the manageable sockets on
and off
•
Continuous beeps – hardware event schedule is lost – for example if
the power supply was cut for a long time. These beeps can be
stopped by pressing the
Silence button
(see Figure #1 above)
•
Alarm beep – will be heard if the managing command cannot be
executed. E.g. if there is a command to switch the socket on but EG-
PMS is disconnected from the power supply. The alarm will be heard
every second during a minute, after that every 8 seconds. Let EG-
PMS execute the command (e.g. switch EG-PMS on) to get rid of
the alarm beeps
