Luba
MD
GL Collector – Technical manual
Version 1.0-EN-January 2012
© Enerconcept Technologies inc.
13
3.7 Installation of the Luba
GL collectors
The Luba
GL collectors are mounted one at a time on supports (two supports per collector). The
collectors are fastened to the supports with aluminum threaded screws (see section 4: Mounting
instructions).
Figure 14: Rows of Luba collectors connected to a make-up air unit
3.8 Joining duct with balancing damper
In order to balance the air flow between each row of the Luba
GL collectors, a balancing damper
is required after the joining cap for each installed row.
Figure 15 : Joining duct
