Luba
MD
GL Collector – Technical manual
Version 1.0-EN-January 2012
© Enerconcept Technologies inc.
6
2.5 Collector support structure
For the installation of one or several rows of Luba
GL collectors, a support system made up of
aluminum hollow bars is used. Depending on the existing roofing, a black rubber mat may be
placed on the roof’s membrane before installing the metal supports.
The support and its components are illustrated in the figure below.
Figure 5 : Support for multi-row system
Table 3: Properties of the supports
Composition
Rubber mat placed on roof (not supplied by Enerconcept)
Treated wooden bases (not supplied by Enerconcept)
Galvanized steel 25 mm (1”) pipes
Height of bottom of collector
12’’ to 42’’ (305 to 1067 mm)
Number of supports per collector
2
