ENERAC 700, Инструкция по эксплуатации

Страница: 37 / 74

37
CHAPTER 7
INTERNAL DATA STORAGE
The ENERAC Model 700 has 500 internal storage buffers. Each buffer stores one
complete set of emissions data. The STORE MENU allows the operator to store
data and manage the internal storage buffers. The last line of the STORE MENU
shows the current buffer. You can save all of the measured parameters at any time
by selecting the first menu choice: Store Current Buffer.
Store Current Buffer
Select Buffer...
Start Average Test
Start Periodic Store
Select Interval: 1m
Review Buffer...
Name Buffers...
Erase Buffer...
00: BUFFER #000
Besides saving a snap-shot of the analyzer’s readings, you can have the analyzer
run an average of its readings, or you can make use of its ability to store data
automatically on a periodic basis.
1. STORE CURRENT BUFFER: The unit will store one set of data into the buffer
currently selected. The index number and the name of the current buffer is
shown at the bottom of the STORE screen.
2. SELECT BUFFER: Selecting this item will display an index of the analyzer’s
500 internal storage buffers. Buffers that are used have an icon next to their
index number. The selected storage buffer is indicated by the reverse color line.
When data is stored, this pointer will automatically advance to the next
available buffer. If you want to store data in a different location, use the UP,
DOWN, & ENTER keys to select a new buffer. As you scroll up and down,
buffers containing data show their date and time at the bottom of the display.
Empty buffers show the word
empty
.
3. START/STOP AVERAGE TEST: The analyzer will start averaging all
channels. When you come back to the STORE MENU and choose:
Stop
Average Test
then the averages will be saved to the current buffer.