ENERAC 700, Инструкция по эксплуатации

Страница: 17 / 74

17
point to the line:
Zero All Sensors
Press the
ENTER
key to execute an auto zero cycle of all the sensors.
7. Following the end of the autozero period, all sensors should indicate zero
reading with the exceptions of the oxygen sensor which should read 20.9%
(the concentration of ambient air) and the stack temperature which should
correspond approximately to the room temperature.
8. Insert the analyzer’s probe into the stack or engine exhaust. Use the
DISPLAY DATA
key to read the stack parameters.
9. To obtain a printout of the data displayed, press the
PRINT
key. The cursor
(reverse color) will point to:
Print Test Record
Press the
ENTER
key to execute a printout on the ENERAC’S printer.
10. To store the data displayed, press the
STORE
key. The cursor (reverse color)
will point to:
Press the
ENTER
key.
Store Current Buffer
11. When you are finished with your measurements, withdraw the probe from
the stack, allow the analyzer to draw ambient air for a minute and for the
probe to cool down, before packing the analyzer in its carrying case.