26
27
Problem
Possible solution
No video
1. Verify power to all pieces of equipment in the system. The camera LED should be ON.
2. Verify that the video cable is connected correctly.
3. Verify that the lens cap has been removed from the lens or that the ids of the lens
is open.
Videos, but no control
1. Power down the system for one minute, then re-apply power.
Dark Video
1. Adjust iris
2. Check A/I connections
8. Troubleshooting
If problems occur, verify the installation of the camera with the instruction in this manual and with other operating
equipments.
Isolate the problem to the specific piece of equipment in the system and refer to the equipment manual for further
information.
EFFECT
D-ZOOM
Activation / deactivation of the digital zoom function
OFF
NEGA/POSI
Switches between negative and positive display.
OFF
B/W
Selection of colour or b/w picture.
OFF
MIRROR
Selection of right, left, reverse picture
OFF
PIP
Picture in picture
OFF
FREEZE
Select real and still picture
OFF
Note
Freeze mode is automatically off, when zoom and focus
operation.
PRESET
SYNC
Internal (INT), line lock (L/L) or AUTO mode.
Sync phase is adjustable in line lock mode
INT
INIT
Initializes camera (factory preset) PRESET/DEFAULT.
Preset
LOAD
Sets camera to default settings (factory preset), FACTORY/
PRESET
Default
SAVE
To store settings (power line interrupt) the programming
has to be saved
here
.
Preset
DNR
Digital noise reduction mode on/off
OFF
Note
In the Enhanced Dyamic Range or Low-Shutter mode,
image quality can be decreased. DIS is operated on digital
zoom x2. DNR is disabled in freeze,
Low-Shutter and WDR mode. WDR is not effective in freeze
status.
