24
25
Description of the submenu settings
Submenu
Factory Setting
WB
AWB
Automatic white balance
AWB
INDOOR / OUTDOOR White balance for indoor or outdoor
MANUAL
Manual white balance setting. The red and green picture
values can be adjusted with the < and > buttons.
The setting is saved with MENU key.
WAWB
Automatic white balance adjustment for wide angle
AE
AUTO, MANUAL,
FLICKERLESS
Automatic adjustment of iris, exposure control and gain
(shutter and AGC)
AUTO
SHUTTER
Normal / 100 / 125 (120) / 250 / 500 / 1000 / 2000 / 5000
/ 10000 / X2 / X4 / X8 / X16 / X32 / X64 (X: number display
low: shutter rate)
AGC
Manual adjustment of gain control (on/off)
ON
MODE
Normal: normal mode
Low shutter: Low-shutter mode
WDR: Enhanced dynamic range mode (automatically,
AE is fixed at manual mode)
DIS: Digital image stabilization
Normal
D/N
ON: Day/Night switch is on. OFF: Manuel (if B/W in the
menu EFFECT is adjusted, then ON is Night / B/W and OFF
is Day/Colour)
OFF
Note
In WDR mode the AE should be adjusted as follows:
AUTO: When using manual lenses
MANUAL: When using AI or DC controlled lenses
BLC
CENTER, TOP,
BOTTOM, OFF
Weighting of picture center (The gray bar indicates the
actual setting).
OFF
TITLE
TITLE MENU
Enter the camera title with the UP and DOWN key.
ABCDEF...-,’
Character table
CMD <– –>
< > S E
Position of tiltle on the screen (must be set prior to writing).
<– –> to move the cursor, < > to delete the characters
Store with
S
and leave the menu with
E
.
Display
DISP0
Displays camera title and camera ID.
DISP1
Displays camera title, camera ID and zoom lens position.
DISP2
Displays all camera status.
DISP2
DISP MODE
Display on, off and pushon (while the button is pressed).
CAM SET
ID
Input of camera ID number. This is displayed upon OSD
activation.
000
BPS
Select serial communication speed (9600/19200 bps)
9600
BRIGHTNESS
User can adjust brightness level (+9 ~ –9).
0
SHARPNESS
User can adjust sharpness level (0~20).
08
