Eneo PXD-2080MIR C, Руководство пользователя

Страница: 16 / 133

16
IMPORTANT!!! DAY->NIGHT and NIGHT->DAY operations must be examined and verified at the final step
of the installation.
Block the lens for a few seconds for NIGHT mode and release and let it return to DAY mode.
If camera stays at NIGHT mode more than 10sec, decrease N-->D(THRES) a little and repeat the fore- mentioned
steps. If the scene is too dim or lens iris was adjusted near close, it may not return to DAY.
DAY NIGHT AUTO Factory Default Descriptions
DELAY 5 DELAY is the duration which should maintain its status before making the D –> N
or N –> D switches. Camera checks the light level seamlessly if it crosses over the
threshold levels of D –> N (THRES) or N –> D (THRES). To make switching, the state
must maintain unchanged for longer than DELAY time.
DELAY can avoid the unwanted/frivolous switching by a short term lights such like the
light from the passing car.
D –> N (THRES) 30 D –> N LEVEL is a threshold level to switch from DAY to NIGHT.
Lower value makes camera entered NIGHT at lower light level.
TO ENTER NIGHT MODE AT LOWER ILLUMINATION, DECREASE it and vice versa
Try NOT to make the gap too small between D –> N (THRES) and N –> D (THRES)
LEVEL to avoid the switch repeating.
N –> D (THRES) 80 N –> D LEVEL is a threshold level to switch from NIGHT to DAY.
Higher value makes camera exited NIGHT at brighter light level.
TO EXIT NIGHT MODE AT BRIGHTER ILLUMINATION, INCREASE it and vice versa
Try NOT to make the gap too small between D –> N (THRES) and N –> D (THRES)
LEVEL to avoid the switch repeating.
CAUTION
1) DAY / NIGHT AUTO menu is strongly recommended to be adjusted for the actual object after completing all
settings of lens for zoom and focus.
2) If the gap between D-->N(THRES) and N-->D(THRES) becomes too small, it is easy to repeat switching DAY
from/to NIGHT. Gap is recommended bigger than 40.
If the switching between DAY and NIGHT repeats, decrease D-->N(THRES) and increase
N-->D(THRES) a little in turn until the repeating stops.
NR menu
2D&3D NR is a very sophistica-
ted and powerful noise reduction
technology at low light.
2DNR reduces noise with the spa-
tial frequency for each field. The
effect of 2DNR is limited because
too strong reduction in 2DNR
results in loss of sharpness.
3DNR reduces noise by time
based reduction with the several
fields.
Too strong 3DNR reduction re -
sults in the tail effect of a comet
or motion blur for the fast moving
target in the dark.
To enter NR menu, press ● at MAIN > NR.