Eneo PXD-2080MIR C, Руководство пользователя

Страница: 116 / 133

ENEO Admin User’s Manual
68
Example 1) Recording Condition: Always , Schedule

Pre-Recording Speed : 1 fps

Pre-Alarm Count : 5

Post-Recording Speed : 10 fps

Post-Alarm Count : 5

Since the recording condition is Always and Schedule, Pre-Recording Speed is in effect.
So the recording speed is 1 fps. Other values don’t affect the recording.
Example 2) Recording Condition: Motion , Sensor
 Pre-Recording Speed : 1 fps
 Pre-Alarm Count : 5
 Post-Recording Speed : 10 fps
 Post-Alarm Count : 5
 Post-Recording Speed is in effect. So the recording speed is 10 fps when Motion is
detected. Also, Pre-Recording Speed is in effect, so image is stored by Pre-Alarm Count
setting. So 5 images will be recorded before Motion is detected (speed: 1 image per
second). After Motion Detection (or Sensor) is over, Post-Recording Speed becomes in
effect now, so only 5 images out of 10 will be stored afterwards. That means that the
images captured until 0.5 second after Post-Alarm images are stored.