Eneo PXD-2080MIR C, Руководство пользователя

Страница: 17 / 133

17
2D&3D NR Factory Default Descriptions
2DNR ON ON enables two dimensional noise reduction.
Noise Reduction is effective at low light.
3DNR ON ON enables three dimensional noise reduction.
Noise Reduction is effective at low light.
Starting or Ending of noise reduction with respect to light level can be set.
In 3DNR menu, START THRES sets the point from which level 3DNR starts while
the illumination goes dim. Higher setting makes 3DNR started at brighter light
level.
END THRES sets the point from which level 3DNR stops while the illumination goes
bright. Higher setting makes 3DNR ended at brighter light level.
DEPTH 80 DEPTH sets the strength of noise reduction for 2D&3D.
Higher setting stands for stronger reduction.
Too high setting will result in loss of sharpness in 2DNR and the tail effect of a comet in
3DNR.
SMART NR ON Camera continuously monitors motion on the screen.
When NO motion is detected, 3DNR is automatically activated for the maximum reduction of
noise at low light. This will save more HDD in DVR.
3DNR becomes immediately deactivated for the smooth motion capture for the moving target
without the tail effect of a comet at low light if the motion is detected.
PICT ADJ. Menu
In PICT ADJUST menu, WHITE BAL, SHARPNESS, MONITOR, OSD
COLOR, CORNER COMP and
D-EFFECT can be set.
To enter PICTURE menu, press ● at MAIN >PIC ADJUST.
PICTURE Factory Default Descriptions
WHITE BAL ATW 1.. ATW (Automatic Tracking White balance): WB is performed automatically.
2. AWC –> SET: WB is performed only whenever is pressed.
WB stops even though the colour temperature changes.
3. INDOOR: WB is fixed for about 3100K.
4. OUTDOOR: WB is fixed for about 5100K.
5. MANUAL: Adjusts WB with the fixed values of BLUE and RED in MANUAL WB
menu.
SHARPNESS 42 Increases or decreases the sharpness of the picture.
Too much sharpness makes the image harsh and shows more noise and line flicker at
the edge of object in the picture.