Operating Instructions
60
Setting up Event-Based Recording
During Event or Pre-Event recording, the NVR system records video based on the event detection for the
scheduled time (supported only for devices registered on the recording service). Event related functions
may not be supported depending on the protocol that the device uses (supported for the iNEX protocol and
some versions of the ONVIF
TM
Conformance and Axis protocol).
1.
Set the schedule time by double clicking the
Time Coverage
schedule window, and then selecting a
desired Preset. The way to set up the schedule time for Event or Pre-Event recording is identical to the
way to set up for Time-Lapse recording. Refer to
Setting up Time-Lapse Recording
(p. 61) for details.
2.
Set up the recording mode to Event Recording or Pre-Event Recording by double clicking the
Condition
schedule window. Then select a desired Preset of event or pre-event condition.
You can add a new Preset or edit a saved Preset by clicking
the
Add
or
Modify
button. Clicking the
Add
or
Modify
button displays the following setup screen.
Event Recording Condition
The NVR system records when predefined events are detected. This function may not be supported
depending on the protocol that the device uses (supported for the iNEX protocol and some versions of
the ONVIF
TM
Conformance and Axis protocol).