Network Video Recorder
93
Network Camera
Network Video Transmitter
Network Camera
: Allocates a stream to use for recording to each Preset.
Network Video Transmitter
: Allocates values for recording to each Preset.
Instant Recording
: Select a Preset to use for instant recording.
Changing Device
’s Setting Remotely
Selecting
Remote Setup Device
from the device menu allows you to change the device’s settings remotely.
Changing the device’s settings remotely might not be available for some settings. If the device supports
more than one protocol, the settings for remote setup in the iNEX program might be different depending
on the protocol in use. Refer to the device’s User’s Manual for details about the settings. Refer to
12.3
Remote Setup of ONVIF
TM
Conformance Protocol Devices
(p. 98) in this manual for details about
remote setup of a device which uses the ONVIF
TM
Conformance protocol.
You can change settings of several devices at the same time using a setup file. Clicking the
(Multiple
Remote Setup) button above the Site panel displays the following screen.
Click the
button at the top right corner and select
a setup file. The list of available devices is displayed.
This function might not be supported depending on
the device model, and the devices that this function
is not supported for will not be displayed in the list
even if the setup file is available for the devices.
Select devices and click the
Apply
button at the
bottom to apply the change.