Operating Instructions
140
Time Coverage
preset: Select the
Always
preset.
Condition
preset
− Condition Type
: Select
Event Condition
.
− Select Target to produce event and event type
: Select
All Devices
,
Inside 1
, and
CAM1
in order.
− Event Types
: Select
Motion Detection
.
Action
preset: Select a desired Preset.
Target
preset: Release the
Same cameras that triggered an event
option → Select
CAM1
of the
Inside 1
device and
CAM1
of the
Inside 2
device from the
All Devices
list.
OSD Information
The OSD (On Screen Display) is displayed in each camera screen in the Live screen of the Client program.
Camera Title: Indicates the camera name set in the iNEX program (upper left
corner of the screen).
(Listen or Talk): Indicates the Client system can receive audio from or sends
audio to the device (upper right corner of the screen).
(PTZ): Indicates PTZ control is enabled (upper right corner of the screen).
(Camera Sequence): Indicates the cameras are being sequenced (upper right
corner of the screen).
(Red: Is displayed during recording in Time-Lapse Recording or Event-Based Recording mode),
(Orange: Is displayed during recording in Instant Recording mode): Indicates video is being recorded
in the NVR system (upper right corner of the screen).
(Zoom In): Indicates video is zoomed in (upper right corner of the screen).
Date, Time: Indicates the date or time of the NVR system (bottom of the screen).
Event Alert: Indicates an event detected (highlights the camera title bar in red).
Motion Block: Indicates a motion event detected in the boxed area (on image) (supported only for network
video transmitters which use the iNEX protocol).
Network Disconnection Log
ID
Explanation
ID
Explanation
0
Unknown error.
15
Cannot reach the recording service.
1
Logout.
16
No route is found to the device.
2
All channels of the device are being used.
20
Connection cancelled.
3
Invalid product version.
26
The RTP port is being already used.
4
Invalid user ID or password.
27
SSL connection failed.
10
No device is running.
28
Network connection timeout.
11
Network is down.
29
Host connection timeout.
12
Cannot reach the device’s network.
30
The device does not support RTP over TCP.
13
Connection timeout.