Operating Instructions
108
Chapter 15
— Event Management
You can manage event detection notification to the Client system based on a preset event management
schedule and monitor or play back the event-detected video on the Client system. Event related functions
may not be supported depending on the protocol that the device uses (supported for the iNEX protocol
and some versions of the ONVIF
TM
Conformance and Axis protocol).
15.1 Setting up Event Management Schedule
First, check the following and run the Setup program.
The NVR system should be running.
Devices should be added to a device group. Refer to
Chapter 12
— Device Management
(p. 89) for
details.
Go to the
Start
Menu → Click
iNEX
→ Run the
iNEX Setup
program → Select the
Event Management
menu, and set up the event management schedule following the procedures below.
Click the
Schedule Setup
button at the bottom. The
Schedule Setup
window appears, and schedule
windows are displayed with the current settings for each Preset.