Operating Instructions
118
Chapter 16
— Map Editor
You can register a map to monitor video from cameras, event detection and input/output device’s status of
devices registered on the NVR system on a map on the Client system.
NOTE:
This function is supported only for devices which use the iNEX protocol, but monitoring video from
cameras supported also for devices which use the
Axis
or
ONVIF Conformance
protocol.
16.1 Registering Map
1.
Go to the
Start
menu, and click
iNEX Setup
, and select the
Device
menu.
2.
Click
Map
in the
Site
panel, and then the
button at the bottom of the Site List panel on the right. The
Map Editor
window appears.
3.
Select an input/output device connected to a device or a sub-map in the
Site
panel and drag and drop it
on the canvas.
4.
Set up the map. Refer to
16.2 Setting up Map
(p. 122) for details.
5.
Entering a map name and clicking the
OK
button completes registration of the map.