User Manual
43
8.7.1.6
、
CC
CC refers to Cross Counting function. Count the line crossing of specific objects in the monitoring
area.
Enable
/Disable CC function
Set
Sensitivity
level, the higher the sensitivity, the smaller the detectable target. It can also be used
to detect distant targets in the scenario.
Enable
Dynamic Marking
option
Type
:
Set the <type> option there are four types for select.
Motion:
Detect all the objects, including Human, Car and still objects
Pedestrian:
Detect the human shapes
Motor Vehicle:
Detect the Vehicle shapes
Non-motorized Vehicle:
Detect some vehicles which have two wheels, like bikes, motor-bicycle etc.
Alarm Number:
Set the limit/condition of triggering the alarm. Its range 1~255. If the parameter is
set to “5”, the CC alarm will be triggered once the “in” count minus the “out” count is greater or equal to
the setting value.
Start Time:
Set the start working time of CC function every day
End Time:
Set the stop working time of CC function every day.
Rule Number:
Set the Rule line number. The CC function only support one rule line
Rule Switch:
allow you enable/disable the current rule number.
Rule Type:
there are two types, <A
B> and <B
A>, for select. If you choose A
B, and monitoring
object enter into B from A, “in” count will be added; from B to A, “out” count will be added.
Reset Count:
Click the <Reset Count> button to clear the current count.
Rule line Setting Area:
allow to set rule line in the area.
Counting Area:
display the count of CC line crossing statistics. How to adjust the position of
Counting please refer the section 8.1 - <Live>
Содержание INB Series
Страница 41: ...User Manual 40 this area ...