User Manual
57
8.8
、
Network
This menu allows you to configure network parameters such as PPPoE, DHCP and SNMP. The most
common type is DHCP. In most cases, the network type is DHCP unless you manually set a static IP. If
you need to authenticate the user name and password to connect to the network, please select PPPoE.
8.8.1
、
General
8.8.1.1
、
General
It automatically gets the IPv4 parameters from the network if the device is connected the router using
DHCP and check
DHCP
option
You can manually configure below network parameters
IP Address:
IP address is the identification of IPC in the network. It consists of four groups of
numbers between 0 and 255, separated by periods. For example, "192.168.001.100".
Subnet Mask:
It is a network parameter that defines the range of IP addresses that can be used in
the network. If the IP address is like the street where you live, then the subnet mask is like a community.
The subnet address also consists of four sets of numbers, separated by periods. For example
"255.255.000.000"
Gateway:
This address allows IPC to access the network. The format of the gateway address is the
same as the IP address. For example, "192.168.001.001".
IPv6 Address:
IP address is the identification of IPC in the network. It consists of eight groups of
numbers between 0 and FFFF, separated by periods. For example, "
ABCD:EF01:2345:6789:ABCD:EF01:2345:6789".
DNS1/DNS2:
DNS1 is the primary DNS server, and DNS2 is the backup DNS server. It is usually
sufficient to enter the DNS1 server address.
Main Stream
：
Check this option to use for multicast
Multicast Address
：
Set the multicast address. The 3rd party video player can request the camera
to send multicast media stream through RTSP protocol
Video Encryption Transmission
：
Enable <Video Encryption Transmission> option
If IPC supports the prompt of IP duplication in the same network segment and the IP is reused, click
Test to popup a window shown as below
Содержание INB Series
Страница 41: ...User Manual 40 this area ...
