User Manual
25
8.3
、
Video Cover
In actual application scenario, some areas are not suitable for monitoring and recording. Those areas
can be hidden in the video through this function. The interface is shown in the figure below.
Enable
：
Switch to turn on the function.
Cover Area
：
Set the area that needs to be covered on the monitoring screen. When setting, the
covering block is red, and the corresponding area of the screen is black when it is enabled. 4 covering
blocks can be set.
Click
<Delete>
to remove the selected covering block.
8.4
、
ROI
ROI allows that you can select an area as an important or sensitive area from the video. This area
can be set to a different frame rate and resolution with the non-selected area.
Bitrate:
Select the bitrate to be set.
Region ID:
Select the region ID, up to eight regions can be set.
Enable Region:
Turn on.
ROI Level:
Set the image quality in the area. The higher the quality is, the higher the resolution and
frame rate are.
Non-ROI Fps:
Set the frame rate outside the region.
Note:
Some models support ROI function
Содержание INB Series
Страница 41: ...User Manual 40 this area ...
