Eneo ENC-501L, Инструкция по установке и эксплуатации

Страница: 24 / 72

24 25
5.1.2 Change Image Setting
Please follow the steps below to change the image setting through the network if and as necessary.
1. Click the
image button on the home page to enter the image-setting page.
2. Adjust the image setting including „Camera Title”, „Resolution”, „Quality”, „Fluorescent”, „BLC”, „Brightness”,
„Hue”, „Saturation”, „Sharpness”, and „Viewer Type” if and as necessary.
3. Click the
Submit button to submit the new image setting.
4. Click the Home button to return to the home page while the new image setting acts on the images to effect the
desired changes instantly. (If the setting has not been changed by the above steps, any (re)entry onto the home
page will find images in their earlier or original setting. )
NOTE: Any change made to settings will take 3 seconds to show in the picture.
Description of function keys:
Camera Title:
Type in the camera title in the given space.
Resolution:
Scroll to choose the image resolution from a range of three sizes (352X224, 720X448 or 720X224).
Quality: Scroll to choose the image quality out of a spectrum of qualities ranging from „highest, high, medium, low,
or lowest”.
Fluorescent: Click „YES” or „NO” as desired.
BLC: Similarly, click „YES” or „NO” as you require.
Backlight:
Type in the backlight level you want, selecting out of an available range from 0 to 255.
Brightness: Enter your desired quality of image brightness from a spectrum of 0 to 255.
HUE: Enter the hue value in the given space (0 to 255).
Saturation:
Type in the saturation level in the blank (0 to 255).
Sharpness: Fill in the sharpness level in the blank (0 to 255).
Submit: Click to submit the new image setting to the LAN CAMERA.
Default:
Click this button to install the default settings in all the entries for image parameters on this page.