Eneo ENC-501L, Инструкция по установке и эксплуатации

Страница: 12 / 72

12 13
Warning:
1. Performing this troubleshooting process may need a monitor, a PC, a card reader and some cables.
2. If SD Card is removed while storing or accessing data, data would be lost.
3. If there is a cross sign beside the „SD” icon, it means the SD Card has inserted into LAN CAMERA but
cannot perform writing function. Possible reasons are:
a. It is not a SD memory card.
b. SD Card is unformatted or formatted with non-FAT16 or non-FAT12 format.
c. Damage is happened on file system.
d. The capacity of SD Card is full.
e. SD Card is set to be read-only.
4. Shut the power before inserting the SD Card. Otherwise the unit may shut down.
3.6. ADJUSTMENT OF LENSES
L
M
AL
K M
L
C mount lens
CS mount lens
Adjustment of flange
focus for fixed focus
lenses
This adjustment (distance between lens casing and sensor surface) is required if a sharp
definition cannot be obtained with the lens focussing, or in order to adjust the
∞
position
To obtain a sharp definition, point the camera at an object which is at least 2000 times
further away from the front of the lens than the focal length. (If the focal length is 7.5mm,
the object must be at least 15m distant from the camera).
Open the aperture fully and set the focus to
∞
(infinite).
If the lens has automatic exposure control, select a dark object, or better use an ND filter
(64-x) to ensure that the aperture is fully open.
Undo set screw
M
. Turn the lens with the CS mount connection until the definition is sharp.
When finished, retighten screw
M
.