Eneo ENC-501L, Инструкция по установке и эксплуатации

Страница: 69 / 72

68 69
7. If you wish to change any of the above setting, type the new information directly into the window. The „
Mode
setting ” has two options: „Infra-structure” and „Ad-hoc”. You should enter „ Ad-hoc ”, and click „ Apply ”.
8. Click the „ Apply ” button to transfer the new settings to the LANCAM.
9. Now the settings are complete.
NOTE: If your PC does not a wireless card, please insert a wireless card in your PC and use the card
to search and join for the wireless connection.
10. Once the settings are complete, while you are still on your PC, you can Login to the LAN camera software
(the Network Viewer) and view the videos from your wireless LAN camera. Please refer to IV-101 LC-RT Installation
manual, Section 5.2.3.1.
NOTE: The wireless LANCAM is linked by its Video Out connection via a BNC connector to a monitor’s
Video In connection. If this connection is there, you can see some information on the monitor
screen, such as the LANCAM Default Static IP address. But the LANCAM Static IP address can only
appear if there is a wireless connection between the LANCAM and another wireless device. If there
is no such connection, the LANCAM Default Static IP address will not appear on the monitor screen.
Infra-structure Wireless LanCam Installation on the LAN
There are two most frequently encountered scenarios. (1) a quick set up with an existing AP device and (2) a quick
set up with a new
NVR
(a network Digital video recorder with a
Built-in AP
device).
A. Set up with an existing AP Device:
Please repeat the installation steps outlined in the „ad hoc” section (but please do remember to choose
infra-structure mode at step 7)
B. Set up with a new NVR
1. Use a RS-232 cable to connect a wireless LanCam with the wireless NVR
Special note (please refer to manual, section 4.4 TCP/IP Communication software):
Since the Lan Cam Default Static IP address is: 192.168.1.168, the IP address for PC Network TCP/IP Properties
should be set within 192.168.1.X (X value can be set as between 1 to 255, excluding 168).
2. Assemble all components that came with the NVR and LANCAM. (i.e. attach the antenna to both the NVR.
Add the Lens to every LANCAM.)
3. Connect the TV Monitor to the NVR with a BNC cable.
4. Power on the NVR: plug the NVR power cord into the outlet.