Eneo ENC-501L, Инструкция по установке и эксплуатации

Страница: 37 / 72

36 37
2. Click „Enable ALARM - UPLOAD via FTP” to checkmark the attached box and activate the function.
3. Click „Enable ALARM - SAVE into SD Card” to checkmark the attached box and activate the function.
4. Click „Enable ALARM - UPLOAD via SMTP” to checkmark the attached box and activate the function.
5. Enter the „Alarm Duration” you have chosen.
6. Click the
Submit button to submit the new setting of the recording.
7. Click the Home button to return to the home page.
Description of function keys:
Enable Alarm - Upload via FTP:
Activates or deactivates the alarm recording upload to the FTP.
Enable Alarm - Save Into SD Card: Activates or deactivates the alarm recording to be saved to the SD Card.
Enable Alarm - Upload via SMTP:
Activates or deactivates the alalrm recording upload to the SMTP.
Alarm Duration: Predetermines the length of the alarm.
• Change the Application Setting - ALARM - MOTION DETECTION
Please follow the steps below to enable changes in the motion detection function of the alarm through the network if
and as necessary.
Set the motion detection:
1. Click the
Motion detection button on the left side of the Alarm to enter the „ALARM - MOTION DETECTION” page.
2. Click and drag the mouse across a targeted zone to draw a red rectangle on the image (coordinates provided
below).
3. Click the Save button to save the motion detection range.
4. Enables / disables the motion detection function.
5. Set up the signal level.
6. Click the
Submit button to submit the new setting of the recording.
7. Click the Home button to return to the home page.