Endress ESE 608 DHG ES DI DUPLEX, Руководство по эксплуатации

Страница: 31 / 55

Status at: January 2013
31
Start the engine as follows:
Fig. 4-3: Started by hand:
1. Move START-STOP switch
(Fig. 4-3-(2))
into the “RUN”
position.
2. Advance engine at the handgrip of the reversing starter
(Fig. 4-3-(1))
.
Support oneself with one hand on the device grip in order to
simplify advancing the engine.

The motor starts.
The electrical devices can be connected and/or hooked up
after a warming-up phase of about one minute.
1. Move START-STOP switch
(Fig. 4-3-(2))
into the “Start”
position.
Only activate the starter briefly (max. 5-10 seconds). Never
start or run the engine with the battery disconnected.

The motor starts.
2. Release the START-STOP switch

The engine has started.
The electrical devices can be connected and/or hooked up
after a warming-up phase of about one minute.
Starting the motor
HAND START
NOTE
NOTE
ELECTRICAL
START
Note
NOTE