Endress ESE 1104 DBG ES FS DIN, Руководство по эксплуатации

Страница: 54 / 88

54
ESE 904 - 1304 DBG DIN Status: at January 2013
5.4 Remote start device
Proceed as follows to operate the generator using the re-
mote start device.
The following requirements must be met:
•
generator is ready for operation
WARNING!
Devices with a remote start device are fitted with an auto-
matic choke. You do not have to use the manual choke dur-
ing an electrical start.
Connect up the remote start device as follows (with the
Harting socket):
Fig. 5-4: Remote start device with Harting plug
Battery charging retention might occur simultaneously
when using the remote start device.
1. Fold away any protective caps on the remote start socket
after unlocking the clip
(Fig. 5-4-(2))
.
2. Plug the remote start operating status / generator con-
necting cable into the remote start socket
(Fig. 5-4-(1))
and
then use the clip
(Fig. 5-4-(2))
to secure it in place.
Remote start device is ready for use.
Requirements
Connecting up a remote
start device
Note