Endress ESE 1104 DBG ES FS DIN, Руководство по эксплуатации

Страница: 69 / 88

Status at: January 2013 ESE 904 - 1304 DBG DIN
69
Fig. 6-3: Change the oil
1. Remove the oil filling screw
(Fig. 6-2-(1))
.
2. Prepare the oil collecting tray.
3. Mount the oil drainage trough
(Fig. 6-3-(2))
.
4. Set the generator at an angle of 30°.
5. Unscrew the oil drainage screw
(Fig. 6-3-(1))
and allow the
oil to drain completely.
Engine oil has been drained.
6. Screw in the oil drainage screw again.
7. Then refill with fresh oil.
The oil has been changed.
WARNING!
The oil escapes immediately after unscrewing the ex-
haust screw.
When changing the oil filter
(Fig. 6-3-(3))
, proceed as described
in the engine manual.
Change the oil
Change oil filter