Endress+Hauser SWA70, Руководство по эксплуатации

Страница: 54 / 116

7 Commissioning WirelessHART Adapter SWA70
54 Hauser
7.2 Inserting and connecting the battery unit
You must first open the housing to insert the battery unit. Please pay attention to the operational
safety instructions. See the "Operational safety" section on Page
7.
The battery unit only needs to be inserted for the "WirelessHART Adapter with battery unit" device
version. The other versions are fully assembled when delivered.
Warning!
• The housing of the WirelessHART Adapter may not be opened in hazardous areas if dust is
present. The housing may only be opened in a dusty atmosphere if adequate ventilation ensures
the environment is free of dust.
You require a Torx T10
to open the housing.
Fig. 7-1: Battery compartment with housing open
Proceed as follows to connect the battery unit:
1. Insert the battery unit into the battery compartment, making sure that the battery unit engages
with a click.
2. Insert the battery connector into the socket on the PCB cover.
Once voltage is supplied to the WirelessHART Adapter, the adapter's operating software starts up.
A WirelessHART Adapter self-test is performed to check whether the assignment of the terminals
has been modified. If the device is being commissioned for the first time, the assignment of the
terminals is determined.
1 Light emitting diodes
2 Push button
3 Socket for battery connector
4 Battery compartment
5 Terminals 1 to 6
6 Terminals for HART modem
1 3 4
5
6
2