Endress+Hauser Smart System SSP200B, Руководство по эксплуатации

Страница: 21 / 36

Smart System for Aquacultures SSP200B Electrical connection
Hauser 21
2. Connect the sensor cable of ammonium and nitrate sensor CAS40D to connection
port 2 .
SSP200B for salt water applications: connecting the sensors
1. Connect the measuring cable of oxygen sensor COS51D to connection port 1 .
2. Connect the sensor cable of ammonium and nitrate sensor CAS40D to connection
port 2 .
6.5 Electrical connection of Modbus Edge Device
6.5.1 Preparing the Modbus Edge Device
Modbus Edge Device
UNO POWER
DC OK
Output DC
24V 30W
L N
Input AC
100V-240V
1
N
1
Teltonica
LTE
Modem
Kunbus
RevPi 3
2
8
9
7
(CPU)
Power
A1
A2
5
L
2 3 4 5 6 7 8
3
1
4
6
A0037744
 18 Modbus Device Edge preparation
1 Antenna connection cables for LTE antenna and LTE modem
2 Cable gland at connection port C
3 Cable gland at connection port D
4 Teltonica LTE modem
5 CPU (Kunbus RevPi 3)
6 Power unit, only for Modbus Edge Device 100 to 240 VAC
7 Free connection of Teltonica LTE modem
8 Split cable gland
9 Ethernet cable (Modbus TCP connection)
1. Open the housing of the Modbus Edge Device →  17.
2. Mount the antenna head.
3. Secure the split cable gland on the Ethernet cable.
4. Mount the split cable gland with the Ethernet cable on
connection port F .
5. Connect the Ethernet cable to the free connection of the Teltonica LTE modem.