Endress+Hauser Proline Prowirl F 200, Руководство по эксплуатации

Страница: 82 / 224

Commissioning Proline Prowirl F 200 PROFIBUS PA
82 Hauser
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Assign process variable – Select process variable for low
flow cut off. • Off
• Volume flow
• Corrected volume
flow
• Mass flow
• Reynolds number
*
Off
On value low flow cutoff One of the following options is
selected in the
Assign process
variable parameter (→  82):
• Volume flow
• Corrected volume flow
• Mass flow
• Reynolds number
*
Enter on value for low flow cut
off. Positive floating-
point number 0
Off value low flow cutoff One of the following options is
selected in the
Assign process
variable parameter (→  82):
• Volume flow
• Corrected volume flow
• Mass flow
• Reynolds number
*
Enter off value for low flow cut
off. 0 to 100.0 % 50 %
* Visibility depends on order options or device settings