TI074D/06/en/12.06
71036056
Technical Information
Proline Promass 80H, 83H
Coriolis Mass Flow Measuring System
The single-tube system with a "fit-and-forget" design:
does not harm the material being measured – chemical-resistant
materials
Application
The Coriolis measuring principle operates independently
of physical fluid properties, such as viscosity and density.
• Extremely accurate measurement of liquids such as
oils, lubricants, liquefied gases, paints, cleaning agents
and solvents
• Fluid temperatures up to +200 °C
• Process pressures up to 40 bar
• Mass flow measurement up to 70 t/h
Approvals for hazardous area:
• ATEX, FM, CSA, TIIS
Connection to all common process control systems:
• HART, PROFIBUS PA/DP, FOUNDATION Fieldbus,
MODBUS
Relevant safety aspects:
• Secondary containment (up to 25 bar), Pressure
Equipment Directive, SIL-2
Your benefits
The Promass measuring devices make it possible to
simultaneously record several process variables
(mass/density/temperature) for various process
conditions during measuring operation.
The uniform
Proline transmitter concept
includes:
• Modular device and operating concept resulting in a
higher degree of efficiency
• Software options for batching and concentration
measurement for extended range of application
• Diagnostic ability and data back-up for increased
process quality
The
Promass sensors
, tried and tested in over
100000 applications, offer:
• Multivariable flow measurement in compact design
• Insensitivity to vibrations thanks to balanced single-
tube measuring system
• Efficient protection against forces from piping thanks
to robust construction
• Easy installation without taking inlet and outlet runs
into account
