Endress+Hauser Proline Cubemass C 500 Скачать руководство пользователя страница 101

Страница: 101 / 108

Proline Cubemass C 500

Hauser

101

The following types of monitoring in safety equipment are possible:

• Mass flow

• Volume flow

• Density

Functional Safety Manual with information on the SIL device →  107

HART certification

HART interface

The measuring device is certified and registered by the FieldComm Group. The measuring system

meets all the requirements of the following specifications:

• Certified according to HART 7

• The device can also be operated with certified devices of other manufacturers (interoperability)

FOUNDATION Fieldbus

certification

FOUNDATION Fieldbus interface

The measuring device is certified and registered by the FieldComm Group. The measuring system

meets all the requirements of the following specifications:

• Certified in accordance with FOUNDATION Fieldbus H1

• Interoperability Test Kit (ITK), revision version 6.2.0 (certificate available on request)

• Physical Layer Conformance Test

• The device can also be operated with certified devices of other manufacturers (interoperability)

Certification PROFIBUS

PROFIBUS interface

The measuring device is certified and registered by the PNO (PROFIBUS User Organization

Organization). The measuring system meets all the requirements of the following specifications:

• Certified in accordance with PROFIBUS PA Profile 3.02

• The device can also be operated with certified devices of other manufacturers (interoperability)

EtherNet/IP certification

The measuring device is certified and registered by the ODVA (Open Device Vendor Association).

The measuring system meets all the requirements of the following specifications:

• Certified in accordance with the ODVA Conformance Test

• EtherNet/IP Performance Test

• EtherNet/IP PlugFest compliance

• The device can also be operated with certified devices of other manufacturers (interoperability)

Certification PROFINET

PROFINET interface

The measuring device is certified and registered by the PNO (PROFIBUS User Organization

Organization). The measuring system meets all the requirements of the following specifications:

• Certified according to:

– Test specification for PROFINET devices

– PROFINET Security Level 2 – Netload Class

• The device can also be operated with certified devices of other manufacturers (interoperability)

Radio approval

The measuring device has radio approval.

For detailed information on the radio approval, see the Special Documentation →  108

Additional certification

CRN approval

Some device versions have CRN approval. A CRN-approved process connection with a CSA approval

must be ordered for a CRN-approved device.

Tests and certificates

• Pressure test, internal procedure, inspection certificate

• EN10204-3.1 material certificate, wetted parts and sensor housing

• PMI test (XRF), internal procedure, wetted parts, test report

Заказывайте

на

сайте

: www.tinnova.ru/endress_hauser/ ||

Эл

почта

: [email protected]

Содержание Proline Cubemass C 500













































































































Результаты поиска

Содержание Proline Cubemass C 500

Отзывы:

Похожие инструкции для Proline Cubemass C 500

Бренды по названию

Популярные бренды

Endress+Hauser Proline Cubemass C 500, Техническая информация

Результаты поиска

Содержание Proline Cubemass C 500

Отзывы:

Похожие инструкции для Proline Cubemass C 500

Бренды по названию

Популярные бренды