Endress+Hauser Micropilot FMR62, Техническая информация

Страница: 8 / 88

Micropilot FMR62
8 V. 4, Rev. 2, 19-03-2018 Hauser
Function and system design
Measuring principle The Micropilot is a "downward-looking" measuring system, operating based on the frequency
modulated continuous wave method (FMCW). The antenna emits an electromagnetic wave at a
continuously varying frequency. This wave is reflected by the product and received again by the
antenna.
D
R
A0032017
 1 FMCW principle: transmission and reflection of the continuous wave
R Reference point of measurement
D Distance between reference point and product surface
The frequency of this wave is modulated in the form of a sawtooth signal between two limit
frequencies f
1
and f
2
:
f
t
1
2
f
2
f
1
∆t
∆f
A0023771
 2 FMCW principle: result of frequency modulation
1 Transmitted signal
2 Received signal
This results in the following difference frequency at any time between the transmitted signal and the
received signal:
Δ f = k Δ t
where Δ t is the run time and k is the specified increase in frequency modulation.
Δ t is given by the distance D between the reference point R and the product surface:
D = ( c Δ t ) / 2
where c is the speed of propagation of the wave.
In summary, D can be calculated from the measured difference frequency Δ f . D is then used to
determine the content of the tank or silo.