Endress+Hauser Micropilot FMR62 Скачать руководство пользователя страница 67

Страница: 67 / 88

Micropilot FMR62

Hauser

V. 4, Rev. 2, 19-03-2018

Industry Canada

Canada CNR-Gen Section 7.1.3

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to

the following two conditions: (1) This device may not interference, and (2) this device must accept

any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts

de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas

produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

[Any] changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.
• The installation of the LPR/TLPR device shall be done by trained installers, in strict compliance

with the manufacturer’s instructions.

• The use of this device is on a “no-interference, no-protection” basis. That is, the user shall accept

operations of high-powered radar in the same frequency band which may interfere with or

damage this device. However, devices found to interfere with primary licensing operations will be

required to be removed at the user’s expense.

• This device shall be installed and operated in a completely enclosed container to prevent RF

emissions, which can otherwise interfere with aeronautical navigation.

• The installer/user of this device shall ensure that it is at least 10 km from the Dominion

Astrophysical Radio Observatory (DRAO) near Penticton, British Columbia. The coordinates of the

DRAO are latitude 49°19ʹ15ʹʹ N and longitude 119°37ʹ12ʹʹ W. For devices not meeting this 10 km

separation (e.g., those in the Okanagan Valley, British Columbia,) the installer/user must

coordinate with, and obtain the written concurrence of, the Director of the DRAO before the

equipment can be installed or operated. The Director of the DRAO may be contacted at

250-497-2300 (tel.) or 250-497-2355 (fax). (Alternatively, the Manager, Regulatory Standards

Industry Canada, may be contacted.)

• The model FMR62T is a submodel of the FMR62 that fulfills the requirements for use as

TLPR (Tank Level Probe Radar).

• The Model FMR62L is a submodel of the FMR62. "L" indicates the unique option GF of the

feature 070 ("Antenna") that fullfills the requirements for use as LPR (Level Probe Radar).

CRN approval

Some device versions have CRN approval. Devices are CRN approved if the following two conditions

are met:
• The device has a CSA approval (product structure: feature 010 "Approval")

• The device has a CRN-approved process connection as per the following table:

Feature 100 in the product structure

Process connection

AFK

NPS 2" Cl.150, PTFE >316/316L

AGK

NPS 3" Cl.150, PTFE >316/316L

AHK

NPS 4" Cl.150, PTFE >316/316L

AJK

NPS 6" Cl.150, PTFE >316/316L

ATK

NPS 4" Cl.300, PTFE>316/316L

MRK

DIN11851 DN50 PN25 slotted nut, PTFE>316L

MTK

DIN11851 DN80 PN25 slotted nut, PTFE>316L

RGJ

Thread ANSI MNPT1-1/2, 316L

TDK

Tri-Clamp ISO2852 DN51 (2"), PTFE>316L

Содержание Micropilot FMR62

























































































Результаты поиска

Содержание Micropilot FMR62

Отзывы:

Похожие инструкции для Micropilot FMR62

Бренды по названию

Популярные бренды

Endress+Hauser Micropilot FMR62, Техническая информация

Результаты поиска

Содержание Micropilot FMR62

Отзывы:

Похожие инструкции для Micropilot FMR62

Бренды по названию

Популярные бренды