Endress+Hauser HART Proline Promass 500, Специальная документация

Страница: 27 / 52

Proline Promass 500 Use in protective systems
Hauser 27
To check that values are displayed correctly, the following string appears on the device display
or operating tool: 012-.
5. The user must confirm that the values are displayed correctly.
 The device displays the current settings for the following parameters one after
another for the user to confirm each of them:
Pressure value
High value
part. filled p d . ipe et
Low value
part. filled p d . ipe et
Temp. coeff.
sound velocity
1)
Reference
sound velocity
1)
Gas type
1)
Failure mode
Installation
direction
Assign
urrent outpu c t
Current span
4 mA value 20 mA value
Damping
Medium
Pressure
compensation
Partial filled
pipe detection
Max. damping
part. filled pipe det.
Assign
low flow cutoff
Off value
low flow cutoff
On value
low flow cutoff
Pressure shock
suppression
Zero point
Signal mode
A0031475-EN
1) This parameter is only displayed if the "Gas" option is selected in the "Medium" parameter.
For detailed information on the parameters in the graphic, see the Operating
Instructions.→  11