Endress+Hauser FOUNDATION Fieldbus Levelflex FMP51, Краткое руководство по эксплуатации

Страница: 7 / 32

Levelflex FMP51, FMP52, FMP54 FOUNDATION Fieldbus Incoming acceptance and product identification
Hauser 7
4.2 Product identification
The device can be identified in the following ways:
• Nameplate specifications
• Extended order code with breakdown of the device features on the delivery note
‣
Enter serial number from nameplates in W@M Device Viewer
( www.endress.com/deviceviewer )
 All of the information on the measuring device and on the scope of the technical
documentation pertaining to the device is displayed.
‣
Enter the serial number from the nameplate in the Hauser Operations app or scan
the 2-D matrix code on the nameplate with the camera
 All of the information on the measuring device and on the scope of the technical
documentation pertaining to the device is displayed.
4.3 Storage and transport
4.3.1 Storage temperature
• Permitted storage temperature: –40 to +80 °C (–40 to +176 °F)
• Use original packaging.
• Option for FMP51 and FMP54: –50 to +80 °C (–58 to +176 °F)
This range applies if the option JN "Transmitter ambient temperature" –50 °C (–58 °F) was
selected in order code 580 "Test, Certificate". If the temperature is permanently below
–40 °C (–40 °F), higher failure rates can be expected.
4.3.2 Transporting the product to the measuring point
L
WARNING
Housing or rod may become damaged or pull off.
Risk of injury!
‣
Transport the measuring device to the measuring point in its original packaging or by the
process connection.
‣
Always secure lifting equipment (slings, eyes, etc.) at the process connection and never lift
the device by the electronic housing or probe. Pay attention to the center of gravity of the
device so that it does not tilt or slip unintentionally.
‣
Follow the safety instructions and transport conditions for devices weighing more than 18
kg (39.6 lbs) (IEC 61010).