Endress+Hauser Flexdip CYA112, Руководство по эксплуатации

Страница: 17 / 36

Flexdip CYA112 Installation
Hauser 17
4. Hook the bracket into the multifunctional clamp ring.
5. Mount the sensor →  13.
6. Secure the chain on the holder with the triangular carabiner.
7. Determine the maximum immersion depth of the assembly.
The assembly may not be flooded. Pay attention to the maximum immersion depth
for this purpose.
5.2.7 Installing the assembly with a float
3
2
1
A0011422
 10 Float mounting
1 Immersion tube with adhesive fitting and sensor adapter (ready-to-install ex works)
2 Float
3 Second immersion tube with 45° adhesive fitting
Preparation:
1. Fit the float (item 2) onto the immersion tube (item 1).
2. Glue the second immersion tube (item 3) and the adhesive fitting (item 3) onto the
immersion tube (item 1) →  13.
3. Adjust the clamps on the cross clamp →  7,  15.
4. Slide the cross clamp over the immersion pipe →  5,  14.
 Make sure that the closed side of the cross clamp faces upwards.