Endress+Hauser Flexdip CYA112, Руководство по эксплуатации

Страница: 15 / 36

Flexdip CYA112 Installation
Hauser 15
1
2
3
4
4
A0038430
 6 Cross clamp
1 Cross clamp
2 Clamps
3 Clamp screw
4 Hook-and-loop cable ties
1
2
3
A0038382
 7 Adjusting the clamps
1 Pipe
2 Clamps
3 Clamp screw
Mounting the main pipe
1. Adjust the clamps on the cross clamp →  7,  15.
2. Slide the cross clamp over the main pipe.
 Make sure that the closed side of the cross clamp faces upwards →  5,  14.
3. Mount the multifunctional clamp ring on the immersion tube above the cross clamp
(funnel-shaped side facing upwards →  8,  16).
 The multifunctional clamp ring acts as an anti-slip lock.
4. Attach the cross clamp, along with the immersion tube, to the transverse pipe of the
bracket.
 Make sure that the closed side of the cross clamp faces towards the basin.
5. Align the assembly and the holder.
6. Tighten the clamp screws finger-tight. Finger-tight corresponds to 13 Nm (9.6 lbf ft).