Endress+Hauser Fieldgate FXA520, Руководство по эксплуатации

Страница: 65 / 108

Fieldgate FXA520 6 Configuring the Fieldgate
Hauser 63
6.3.6 Special
Special
opens a series of dialogues that relate to service issues.
Get Configuration File
The Get Configuration File dialog allows a configuration file to be downloaded from the Fieldgate.
1 If not already selected, press
Switch to Administration Mode
and log in as administrator.
2 Press
Settings
and then
Special
: the Get Configuration File dialog appears
:
3 Select the desired file by clicking on the box
4 After a click on "
Send
" the corresponding configuration file is downloaded.
A direct download can be using a browser via the following addresses:
• <IP Addresse Fieldgate>/config.320 bzw.
• <IP Addresse Fieldgate>/config.520
A direct download always contains both user and sensor settings.
Restore Configuration
The Restore Configuration dialog allows a configuration file to be reloaded into the Fieldgate.
1 Press
Browse
and search for the configuration file, .cgi (Name must start with "520")
– If restore.cgi is enterred manually in the browser, the default page is uploaded
(Overview Page with User Rights)
2 After a click on "
Send
" the corresponding configuration file is uploaded.
Clearing Logs
Scrolling down the reveals the following additional dialogs:
Parameter description
Exporet User Settings
Click on the check box to download all configuration data that concern the Fieldgate and
have been set in the Settings menu
Export Sensor Settings
Click on the check box to download all configuration data that are to be found in the Detail
view of a senosr, e.g. alarm limits, tag names, linearization table
Dialog Description
Miscellaneous Settings
Actives/Deactivates the hardware lock, see Chapter 6.5
Firmware update
Downloads the latest firmware to the Fieldgate via Internet, see Chapter 9.4
Clear Log Information
Click the box and press
Send
to reset the selected log
System Restart
Click the box and press
Send
to restart the Fieldgate
– all pending parameter changes are written to the Fieldgate , which is then restarted