Endress+Hauser EngyCal RH33, Краткое руководство по эксплуатации

Страница: 9 / 40

EngyCal ® RH33
Identification
Hauser 9
A0013584
 2 Labeling of front foil for devices with approval for custody transfer
3.2 Scope of delivery
The scope of delivery of the BTU meter comprises:
• BTU meter (field housing)
• Brief Operating Instructions in paper form, Operating Instructions and additional
documentation (on CD-ROM)
• Optional temperature sensors TR10
• Optional interface cable and DVD set with FieldCare Device Setup parameter configuration
software
• Optional Field Data Manager software MS20
• Optional mounting hardware for DIN rail, panel mounting, pipe mounting
• Optional overvoltage protection
Please note the device accessories in Section 8 "Accessories" of the Operating Instructions
on the CD-ROM.
3.3 Certificates and approvals
The BTU meter and the optionally available paired temperature sensors fulfill the
requirements of Directive 2004/22/EC (Measurement Instruments Directive, MID) and OIML
R75 and EN-1434.
If the arithmetic unit with temperature sensors is to be used in commercial applications, the
flow sensor must also have a type approval (incl. conformity assessment) according to MID.
Measuring devices with MID approval have the MID mark on the front foil. (→  1,  8).
This approval replaces the initial calibration on-site.
The calibrated arithmetic unit can be set individually onsite. Custody transfer-related
parameters, such as the pulse value of the flow transmitter, can be changed up to three times.
The changes to the custody transfer-related parameters are recorded in a custody transfer
logbook. This allows individual defective sensors to be replaced in the field without losing the
custody transfer status.