Endress+Hauser Deltabar FMD71 Скачать руководство пользователя страница 5

Страница: 5 / 68

Deltabar FMD71, FMD72

Document information

The nameplate provides information on the Safety Instructions (XA) that are relevant

for the device.

1.2

Document conventions

1.2.1

Safety symbols

Symbol

Meaning

DANGER

A0011189-EN

DANGER!

This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in
serious or fatal injury.

WARNING

A0011190-EN

WARNING!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in
serious or fatal injury.

CAUTION

A0011191-EN

CAUTION!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in
minor or medium injury.

NOTICE

A0011192-EN

NOTICE!

This symbol contains information on procedures and other facts which do not result in
personal injury.

1.2.2

Electrical symbols

Symbol

Meaning

A0011197

Direct current

A terminal to which DC voltage is applied or through which direct current flows.

A0011198

Alternating current

A terminal to which alternating voltage is applied or through which alternating current flows.

A0017381

Direct current and alternating current

• A terminal to which alternating voltage or DC voltage is applied.
• A terminal through which alternating current or direct current flows.

A0011200

Ground connection

A grounded terminal which, as far as the operator is concerned, is grounded via a grounding
system.

A0011199

Protective ground connection

A terminal which must be connected to ground prior to establishing any other connections.

A0011201

Equipotential connection

A connection that has to be connected to the plant grounding system: This may be a potential
equalization line or a star grounding system depending on national or company codes of practice.

1.2.3

Symbols for certain types of information

Symbol

Meaning

A0011193

Tip

Indicates additional information.

A0011194

Reference to documentation

Refers to the corresponding device documentation.

A0011195

Reference to page

Refers to the corresponding page number.

A0011196

Reference to graphic

Refers to the corresponding graphic number and page number.

Содержание Deltabar FMD71





































































Результаты поиска

Содержание Deltabar FMD71

Отзывы:

Похожие инструкции для Deltabar FMD71

Бренды по названию

Популярные бренды

Endress+Hauser Deltabar FMD71, Описание параметров устройства

Результаты поиска

Содержание Deltabar FMD71

Отзывы:

Похожие инструкции для Deltabar FMD71

Бренды по названию

Популярные бренды