Endress+Hauser Deltabar FMD71 Скачать руководство пользователя страница 15

Страница: 15 / 68

Deltabar FMD71, FMD72

Backing up or duplicating the device data

The following options are available to you with an operating tool that is based on FDT

technology (e.g. FieldCare):

• Storage/recovery of configuration data.

• Duplication of device parameters.

• Transfer of all relevant parameters when replacing electronic inserts.
Use the following parameter for this:

Download select. (visible only in FieldCare)

Navigation

Expert → System → Management → Download select.

Write permission

Operators/Service engineers/Expert

Description

Selection of data packages for up/download function in Fieldcare and PDM.

Prerequisite

DIP switch set to "SW" and "Damping" set to "on". If you download using the factory setting

"Configuration copy", all parameters required for a measurement will be downloaded. The

functionality of the "Electronics replace" setting is reserved for Hauser Service and

can be accessed only if the correct device access code is entered.

Options

• Configuration copy: This option overwrites general configuration parameters with the

exception of the serial number, order number, calibration, pos. zero adjust, application

and day information.

• Device replacement: This option overwrites general configuration parameters with the

exception of the serial number, order number, calibration and pos. zero adjust.

• Electronics replace: This option overwrites general configuration parameters.

Factory setting

Configuration copy

Содержание Deltabar FMD71





































































Результаты поиска

Содержание Deltabar FMD71

Отзывы:

Похожие инструкции для Deltabar FMD71

Бренды по названию

Популярные бренды

Endress+Hauser Deltabar FMD71, Описание параметров устройства

Результаты поиска

Содержание Deltabar FMD71

Отзывы:

Похожие инструкции для Deltabar FMD71

Бренды по названию

Популярные бренды