1.1 Measuring system
The complete measuring system consists of
•
Cerabar S pressure transmitter with 4…20 mA signal output
•
optional four-character pressure display
•
power supply 11.5…45 V DC
For electronic versions with HART protocol, a digital communication signal is
superimposed on the signal current and is used for remote calibration.
These instruments have additional functions also to measure level.
Operation can be carried out using:
•
the Commuwin II operating program
•
the Universal HART Communicator DXR 275 handheld (HART protocol)
0 - 10 bar
Cerabar S
with display
11.5…45 V DC
4…20 mA
BA187Y0
6
e.g. RN 221N transmitter
power supply unit
Figure 1.3
Cerabar S measurement system
with display
Cerabar S
1 Introduction
Hauser
7
