Endress+Hauser cerabar S, Руководство по эксплуатации

Страница: 36 / 64

6.6 Measuring point information
The following information on the measuring point can be retrieved:
Display messages for
diagnosis The level indicator enables the smallest and largest measured values for pressure and
temperature to be called up. The value is not lost on switching off the device.
Communication level The matrix line "VA Communication" can only be called up and calibrated with the
Commuwin II operating program or the Universal HART Communicator DXR 275
handheld.
Matrix field Display or entry
Measured values
V0H0 Main measured value: level, volume or weight
V2H6 Sensor temperature (units in V7H9 selectable)
V7H0 Output current in mA
V7H8 Sensor pressure (units in V0H9 selectable)
Sensor data
V0H1 Lower range-value, (pressure for level "empty")
V0H2 Upper range-value, (pressure for level "full")
V2H5 Overload counter pressure (0…255)
V3H1 Lower range-value for level, volume or weight ("empty")
V3H2
Upper range-value for level, volume or weight ("full")
V7H4 Low Sensor Trim (units in V0H9 selectable)
V7H5 High Sensor Trim (unit in V0H9 selectable)
V7H6 Lower range-limit of sensor (units in V0H9 selectable)
V7H7 Upper range-limit of sensor (units in V0H9 selectable)
Measuring point information
V2H2 Device and software number
Error response
V2H0
Actual diagnostic code
V2H1 Last diagnostic code
VAH0 Measuring point tag
The measuring point can be identified with a max. of 8 (ASCII) characters
VAH1 User text
VAH2 – VAH8 Information about the device
Matrix field Display
V2H3 Peak hold P Min (Maximum pointer for minimum pressure)
V2H4
Peak hold P Max (Maximum pointer for maximum pressure)
V2H7 Peak hold T Min (Maximum pointer for minimum temperature)
V2H8 Peak hold T Max (Maximum pointer for maximum temperature)
V2H5 Overload counter pressure (0…255)
V2H6 Current sensor temperature (units in V7H9 selectable)
6 Level Measurement Cerabar S
36 Hauser