Cerabar S 4 to 20mA HART
Description of parameters
Hauser
17
P01-MIDxxxxx-19-xx-xx-EN-012
Fig. 7:
EXTENDED SETUP function group
for measuring mode "Pressure", see Page 17, Table 5
1)
1)
*
LANGUAGE
Pressure
BASIC SETUP
DISPLAY
SETTINGS
POSITION ADJUSTMENT
OPERATING MENU
GROUP SELECTION
Measured value
EXTENDED SETUP
TEMP. ENG. UNIT
1) Display via on-site display only
Parameters marked with an asterisk "*"
are not always displayed. The display
depends on the settings of other parameters,
see the following Table.
Level (not
for PMP71 with MID)
provided
Table 5: (GROUP SELECTION
) OPERATING MENU
SETTINGS
EXTENDED SETUP "Pressure"
Parameter name
Description
Prerequisite
:
• MEASURING MODE = Pressure
Note:
• See also Page 8 ff, Section 4 "Pressure measurement".
TEMP. ENG. UNIT (318)
Options
Select the unit for the temperature measured values.
See also PCB TEMPERATURE (Page 25) and SENSOR TEMP. (Page 30).
Options:
• °C
• °F
• K
• R
Factory setting:
°C
