manualshive.com logo in svg

Endress+Hauser analytikjena CyBio Carry, Руководство по сборке, Страница: 16 / 50

Поделиться
Скачать
Endress+Hauser analytikjena CyBio Carry Скачать руководство пользователя страница 16

Technical description

CyBio Carry

16

Fig. 9

Control panel with arrow keys and 2 LEDs

The 

status LED

 is located on the upper edge of the gripper tower. It is clearly visible

from all sides. The status LED indicates the following operating states:

Green, constant
light

The device is ready for operation. It can be operated via PC.

Green, flashing

The device is working. It is completing a preset sequence.

Yellow

A protective device has stopped the movement.

Red

A device error has occurred.

Type plates

The type plates are attached to the bottom of the gripper tower and the side of the lin-
ear axis. The type plates contain the following information:

¡

Company name and complete address of the manufacturer

¡

Name of the machine (type designation and trade name)

¡

Model and serial number

¡

Year of manufacture

3.2

Connections and interfaces

The connector panel is located on the front end of the linear axis.

Fig. 10

Connections and interfaces

Содержание analytikjena CyBio Carry



















































Отзывы:

Нет отзывов