Endress+Hauser Analytik Jena CyBio FeliX Скачать руководство пользователя страница 19

Страница: 19 / 116

Rev. B 2022/02

CyBio FeliX

General information

The term

non-conforming use

will include, but is not limited to:



the use of the device in medical laboratories

not

affiliated with research



working with explosive or aggressive substances



working in explosive atmospheres - use in potentially explosive areas is not permitted

This includes compliance with all safety requirements for the protection of people and

material goods during work with radioactive, infectious, poisonous, corrosive, combustible

and other hazardous substances. The user is under obligation to fulfill all requirements on

laboratory equipment and the conduct of personnel handling substances of this nature and

on the practices , in place for cleanness, sterilization, environmental protection and waste

disposal.
For the use of the device with hazardous substances, the user is recommended - unless

otherwise regulated by law - to issue operating instructions.

Accordingly, this User Manual contains no safety notes to protect from personal injury or

material damage caused by substances being examined.
Process control must rely on included manufacturer software.

Alterations in or damage to the software may give rise to faults in process flow and dam-

age the system or its components.

Software protection is the sole responsibility of the user.

NOTE

System operation with involvement of hazardous substances will be the sole responsi-

bility of the user!

Содержание Analytik Jena CyBio FeliX





















































































































Результаты поиска

Содержание Analytik Jena CyBio FeliX

Отзывы:

Endress+Hauser Analytik Jena CyBio FeliX, Руководство по эксплуатации, Страница: 19 / 116

Результаты поиска

Содержание Analytik Jena CyBio FeliX

Отзывы: