Keep the the base (Ba) facing towards you.
Align the hole at the bottom left of the operation screen with the
threaded hole of the aluminum profile on the right side of the base (Ba),
secure with M5x8 screws, and use the Allen key to tighten the screws.
Attach the switching power supply unit to the bottom as show on the
diagram to the left (button switch at the bottom right). Screw holes of the
switching power supply should pass through the holes of the aluminum
profile (R). Using M4x20 screws, pass through the front of the profile (R) and
use the Allen key to tighten the screws.
Prepare the following parts:
a. M5x8 hex drive rounded head screws (2x)
b. Operation screen assembly(S) (1x)
c. M4x20 socket head hex screws (2x)
d. Switching power supply assembly
(
P
)
-
(1x)
e. 3mm Allen key
f.
*Select the correct input voltage to
match your local mains (230V or 115V).
3
115V
230V