Take out the aluminum profile (B2), pay
attention to the counterbore hole at the top (see
the figure on the left), align the aluminum profile
(B2) hole with the threaded hole of the base (Ba),
use the M5*25 screw and washer, from the top go
through the aluminum profile hole(B2), use the
Allen key to tighten the screws.
Take out the end cover (C) of the profile,
and attach it to the ends of the aluminum profile
(B2). Apply a little pressure and insert it into it. The
end face of the aluminum profile may be sharp. Be
careful not to scratch your hand.
Back
Prepare the following parts:
a. M5x25 socket head hex screws (4x)
b. M5 Washer (4x)
c. Profile end caps(C)-(2x)
d. Aluminum profiles (B2)-(1x)
e. 4mm Allen key
10
