Prepare 2mm and 2.5mm Allen key.
The direction of the base (Ba) keeps the end in front
and rotates the X-axis assembly horizontally by 180°.
Align the pulleys on both ends of the X-axis assembly
with the aluminum chute on the base (Ba). Align the screw
rod with the nuts in the extrusion assembly (E). Use the
appropriate Allen key to slightly loosen the screws that
holding the nuts. Mount the X-axis assembly on the base (Ba)
Manually apply force and slide the X-axis assembly up
and down to slowly lock the screws that secure the nut.
Slide the X-axis assembly up and down again to make
sure the slide is smooth. If it is not smooth, try loosening the
screws of the coupling slightly, turning the screws gently, and
slowly tightening the screws.
Back
9