60
Why does the bottom support always
stick and fall easily?
Here is our suggestion for you problem:
The support itself has a small contact surface, and it is difficult to bond with the
platform directly.
Please add a base to the model can be a good solution to the problem
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
61
How do I switch from Quick Mode to
Full Mode?
Here is our suggestion for you problem:
Open the Tools option in the menu bar to switch modes
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
62
Can I print the model directly with
the default parameters of the
software?
Here is our suggestion for you problem:
Default parameters allow direct printing of models
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
63
How to save the Gcode file?
Here is our suggestion for you problem:
You can save the Gcode file by going to 'Save Gcode File' inside the file
Or by clicking on the save icon in the top left corner of the software interface
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
Other issues
64
How do I deal with the warping issue
during printing?
Here is our suggestion for you problem:
1. Hot bed temperature can be set to 50-60 degrees
2. Please re-level the nozzle and hot bed to maintain the thickness of 1 sheet of A4
paper.
3. Print area coated with solid adhesive
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
