78
What about the knob failure?
Here is our suggestion for you problem:
1. Try gently rotating the button and pulling it out 2mm.
2. If this does not solve the problem, the knob or screen needs to be replaced.
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
Slicing software failure
79
What about the software installation
always fails?
Here is our suggestion for you problem:
1. Please confirm whether it is installed in the computer C disk
2. Please check whether the software is incompatible with the computer system.
3. Please try to replace other slicing software
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
